Built for agencies and B2B sales teams.

Start free →

Free DKIM Record Checker

Check your domain's DKIM public key using its selector. Review the published DNS key record, reported key details, and common configuration problems. Don't know your selector? Try a limited search of common names.

selector._domainkey.domainPublished key recordReported key details
DKIM CheckerFreeExample result
The d= domain that signs your mail
The s= value from a DKIM-Signature header. Looked up at selector._domainkey.domain
Auto-detect common selectorsTries a limited list of common names when the selector is blank. It cannot find custom selectors.
These show common selector formats. They are not verified DKIM records, and they only fill the selector, so your domain stays as entered.
EXAMPLE

Example: DKIM record found

selector1._domainkey.example.com v=DKIM1; k=rsa; p=MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEA…
Selectorselector1
Lookup nameselector1._domainkey.example.com
Public keyPublished
Key typersa
This is a sample, not a result for your domain.
Enter a domain and selector to see the record, key details and findings.
How it works

How to use the DKIM Checker

  1. 01

    Enter the domain and selector

    Use the signing domain (d=) and the selector (s=) your provider gave you, or copy both from a DKIM-Signature header.

  2. 02

    Read the three result tabs

    DNS path, public key and key health.

  3. 03

    Fix the record and re-test

    Correct the selector or the key, then check again.

Find your selector

How to find your DKIM selector

A DKIM key is published at selector._domainkey.domain, so you need both values. Illustrative header excerpt:

DKIM-Signature: v=1; a=rsa-sha256; d=example.com; s=selector1; …

d= and s= in the header

d= is the signing domain and s= is the selector. Here the key would be looked up at selector1._domainkey.example.com. Open a message the domain sent and read its DKIM-Signature header, or use the Email Header Analyzer.

Auto-detect is limited

With the selector blank, the checker tries a limited list of common names. It cannot find every custom selector, and no match does not mean a domain has no DKIM.

TXT record or CNAME

Some providers ask you to publish the key as a TXT record. Others ask for a CNAME at the selector name that points to a key they host. Use exactly the values your provider shows, and never guess a target.

Google Workspace and Microsoft 365

Google Workspace generates the key in the Admin console, which shows the selector and TXT value to publish. Microsoft 365 asks for two CNAME records, selector1 and selector2, whose targets are shown in the Microsoft Defender portal. Confirm details in each provider's current documentation.

What it checks

What the DKIM Checker checks

Selector path

How selector._domainkey.domain is built and resolved.

Public key presence

Is there a non-empty p= value?

Published key record

The DNS answer for the selector, as the check returns it.

Reported key details

Key type from the record. Key length shows Not reported unless the check supplies it.

Raw DNS record

The record exactly as published.

Plain-language findings

What each result means.

Reading results

Anatomy of a DKIM key record

A DKIM record is a short list of tags. The p= tag holds the public key. For RSA, 1024 bits is the current minimum and 2048 bits is recommended where your provider supports it, so a 1024-bit key is not automatically invalid. Ed25519 is also a standardized DKIM algorithm, but this page does not fully validate Ed25519 keys.

TagMeaningWhat to look for
v=DKIM1Version of the recordRecommended but optional. DKIM1 is the default
k=Key type, usually rsarsa is the default if omitted. ed25519 is also defined
p=The public keyRequired. An empty p= means the key is revoked
t=Optional flagst=y indicates testing mode
Common issues

Common problems and how to fix them

Wrong selector

The key lives at the selector your provider uses. A typo looks like a missing key.

Wrong signing domain

The domain in the lookup must match the domain that signs the message.

Revoked or empty key

An empty p= tag means the key was revoked.

Malformed key

A pasted key that is split or truncated will not validate.

DMARC alignment problems

DKIM can pass while DMARC fails if the signing domain does not align with From.

Removing old selectors too early

Messages already in flight may still be verified against the old key.

DNS publication only

The checker reads what is published in DNS. It does not prove that messages are signed or that a signature verifies, because that happens per message at the receiving server. DMARC alignment is a separate test of whether the signing domain matches the From domain; use the DMARC Checker for policy and SPF Checker for the other half of authentication. To confirm signing, inspect the DKIM-Signature and Authentication-Results headers of a received message with the Email Header Analyzer.

Use cases

When to run this check

Before setup

Confirm the selector your provider asked you to publish.

During migrations

Check old and new selectors side by side.

After authentication failures

Rule out DNS before you investigate message signing.

FAQ

DKIM Checker FAQ

Still unsure? Read the DevBoxy blog or contact the team.

What is a DKIM checker?

A DKIM checker looks up the public key a domain publishes for a selector and reports whether the record is present and well formed. It reads DNS only and does not check the signature on any message.

What is a DKIM selector?

A selector is a label that points to one DKIM key. It lets a domain publish several keys, for example one per provider.

How can I find the exact selector?

Your email provider's setup page shows it, and the DKIM-Signature header of a sent message includes it as s=, next to the signing domain in d=. Auto-detect only tries a limited list of common selectors, so it cannot find every custom one.

Can a selector point to a CNAME?

Yes. Many providers publish the key themselves and ask you to add a CNAME at the selector name. This checker does not display CNAME targets or delegation chains, so use your provider instructions to confirm the CNAME value.

What does an empty p= tag mean?

The key has been revoked, so receivers will not accept signatures made with it.

Is a 2048-bit DKIM key better than 1024-bit?

2048-bit RSA is recommended where your provider supports it. 1024 bits is the current minimum, so a 1024-bit key is not automatically invalid. Key size alone does not decide how mail is delivered.

Can DKIM use Ed25519 instead of RSA?

Yes. Ed25519 is a standardized DKIM algorithm, but provider and receiver support varies, and this checker does not fully validate Ed25519 keys.

Why does DKIM pass but DMARC fail?

DMARC also requires alignment. If the DKIM signing domain does not match the From domain, DMARC can fail even though DKIM passes.

Does DKIM improve deliverability?

A verifying signature shows the signed parts of a message were not altered, which helps receivers trust it. It does not guarantee inbox placement, which also depends on reputation, content and list quality.

When should DKIM keys be rotated?

Rotate keys on a regular schedule and after any suspected exposure, and keep the old selector published until in-flight mail has cleared.

What if I do not know my DKIM selector?

Open a message your domain sent and read the s= value in its DKIM-Signature header, or check your email provider setup page. You can also leave the selector blank and use auto-detect, which tries a limited list of common names and may find nothing.

Does a DKIM record in DNS prove my emails are signed?

No. A published key only shows the DNS side is in place. Whether messages are signed, and whether a signature verifies, is decided per message, so inspect the headers of a received email to confirm.

Which DKIM tags are required in the record?

Only p= is required. v=DKIM1 is recommended but optional, and k= defaults to rsa when omitted. An empty p= means the key is revoked, and t=y marks the domain as testing DKIM.

What is the difference between a TXT record and a CNAME for DKIM?

A TXT record holds the key itself. A CNAME at the selector name points to a record your provider hosts, which lets them rotate keys. Use the exact record type and value your provider gives you.

Pair DNS checks with list verification.

Healthy authentication protects your domain. Clean contacts protect your sender reputation. Cleaner outreach starts with better data.